Compaq ProLiant 7000 SMART-2DH Array Controller Reference Guide - Page 102
Servers Running Non-Compaq SCO, OpenServer 5
View all Compaq ProLiant 7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
6-34 Installing the Operating System Drivers Servers Running Non-Compaq SCO OpenServer 5 To access the driver installation information for systems running non-Compaq SCO OpenServer 5: 1. Place the diskette labeled Documentation Diskette in the diskette drive of a server or PC. 2. Reboot the system. 3. Select the file named INSTALL.TXT to view (Enter) or print (F7). 4. Follow the instructions in this file to install the SMART-2DH Controller driver in a server running non-Compaq version of SCO OpenServer 5. Updating the Compaq Insight Manager Agents If you are using Compaq Insight Manager, you will need to update the Insight Agents for this monitoring utility for support of the new SMART-2DH Array Controller. If you used SmartStart 3.40 or later to install the operating system on a new SMART-2DH Controller installation or upgrade your driver in an existing installation the agents were automatically updated for you by SmartStart, you will not have to manually update the agents. The agents included in SmartStart 3.40 provide the same Insight Manager support as for the SMART Controller and includes support for SMART-2DH only. The agents in SmartStart versions later than 3.40 will provide full Insight Manager support for the SMART-2DH Controller. If you did not use SmartStart 3.40 or later as part of your SMART-2DH Controller installation you must manually update the Insight Agents. The correct agents can be obtained from your local Compaq Reseller or Authorized Compaq Service Provider. Refer to the documentation included with Compaq Insight Manager for the correct procedure for updating agents. Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: G-CH06.DOC Last Saved On: 2/27/98 12:01 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED