Compaq ProLiant 7000 SMART-2DH Array Controller Reference Guide - Page 180
Slot x Drive Array - SCSI Port y Termination, Slot x Drive Array - ProLiant Storage System
View all Compaq ProLiant 7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
H-5 POST Error Messages continued 1774 Slot x Drive Array - Obsolete data found in Array Accelerator. Data found in accelerator was older than data found on drives. Obsolete data has been discarded. (RESUME = F1 KEY) Data found in Array Accelerator is older than data found on drives due to drives having been disconnected, used on another controller, and then reconnected. Press F1 to discard older data. 1775 Slot x Drive Array - ProLiant Storage System Not Responding SCSI Port (y): Check storage system power switch and cables. Turn the system power off while checking the ProLiant power and cable connections, then turn the system power back on to retry. (RESUME = F1 KEY) Turn off power to system. Check external ProLiant power switch - external drives must all be powered up before or at the same time as the main system. Check cables. If retry does not help, try replacing the cable, ProLiant firmware, ProLiant backplane, or the SMART-2 Controller. 1776 Slot x Drive Array - SCSI Port (y) Termination Problem Detected. (RESUME = F1 KEY) The termination power signal for the specified SCSI port was shorted to ground. Termination power was automatically turned off to prevent damage to the internal hardware. Turn off the server power and check the cabling to the specified SCSI port. Replace damaged cables/faulty SCSI devices attached to cable. continued SMART-2DH Array Controller Reference Guide Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: O-APPH.DOC Last Saved On: 2/27/98 12:10 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED