Compaq dx2200 HP Compaq dx2200 Microtower PC - Computer Setup (F10) Utility Gu - Page 11
Computer Setup F10 Utilities, Computer Setup-Standard CMOS Features continued
![]() |
View all Compaq dx2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Table 3 Computer Setup-Standard CMOS Features (continued) SATA Channel 1 Master For each, allows you to: SATA Channel 2 Master ● run HDD self-test for selected channel: ● SMART Status Check ● HDD Short Self-Test ● HDD Extended Self-Test ● set extended IDE drive on selected channel to: ● None ● Auto ● set access mode on selected channel to: ● Large ● Auto ● view: ● Firmware Version ● Capacity ● Cylinder ● Head ● Precomp ● Landing Zone ● Sector Floppy Controller Disables/enables the floppy disk controller. Drive A Allows you to set Drive A to: ● None ● 1.44M, 3.5 in. Halt On Allows you to set POST error behavior to: ● All Errors ● No Errors ● All but Keyboard ● All but Diskette ● All but Diskette/Keyboard POST Delay Allows you to set a POST delay to: ● 0 seconds ● 5 seconds ● 10 seconds ENWW Computer Setup (F10) Utilities 5
![](/manual_guide/products/compaq-dx2200-hp-compaq-dx2200-microtower-pc-setup-f10-utility-guide-16c2bbc/11.png)