Compaq dx2200 HP Compaq dx2200 Microtower PC - Computer Setup (F10) Utility Gu - Page 14

Computer Setup—Integrated Peripherals

Page 14 highlights

Computer Setup-Integrated Peripherals NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 6 Computer Setup-Integrated Peripherals Option Description Onboard HD Audio Disables/enables onboard HD audio. OnChip USB Controller Disables/enables USB controller. USB Legacy Support Disables/enables USB legacy support function (USB keyboard, USB mouse, and USB flash media). Onboard LAN Disables/enables onboard LAN controller. Onboard LAN Boot ROM Disables/enables the boot ROM of the onboard LAN chip. Onboard Serial Port Allows you to select a setting for the onboard serial port: ● Disabled ● 3F8/IRQ4 ● 2F8/IRQ3 ● 3E8/IRQ4 ● 2E8/IRQ3 Onboard Parallel Port Allows you to select a setting for the onboard parallel port: ● Disabled ● 378/IRQ7 ● 278/IRQ5 ● 3BC/IRQ7 Parallel Port Mode Allows you to select parallel port mode: ● SPP ● EPP ● ECP ● ECP+EPP ● Normal ECP Mode Use DMA If Parallel Port Mode is set to ECP or ECP+EPP, allows you to set the DMA channel for ECP Mode to 1 or 3. 8 Computer Setup (F10) Utility ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

Computer Setup—Integrated Peripherals
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 6
Computer Setup—Integrated Peripherals
Option
Description
Onboard HD Audio
Disables/enables onboard HD audio.
OnChip USB
Controller
Disables/enables USB controller.
USB Legacy Support
Disables/enables USB legacy support function (USB keyboard, USB mouse, and USB flash media).
Onboard LAN
Disables/enables onboard LAN controller.
Onboard LAN Boot
ROM
Disables/enables the boot ROM of the onboard LAN chip.
Onboard Serial Port
Allows you to select a setting for the onboard serial port:
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Onboard Parallel Port
Allows you to select a setting for the onboard parallel port:
Disabled
378/IRQ7
278/IRQ5
3BC/IRQ7
Parallel Port Mode
Allows you to select parallel port mode:
SPP
EPP
ECP
ECP+EPP
Normal
ECP Mode Use DMA
If Parallel Port Mode is set to ECP or ECP+EPP, allows you to set the DMA channel for ECP Mode
to 1 or 3.
8
Computer Setup (F10) Utility
ENWW