Compaq dx7200 HP Compaq Business PC dx7200 MT Service Reference Guide, 1st edi - Page 121
Vertically Oriented Expansion Card, 7.9.1 Expansion Card Retainer
View all Compaq dx7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Removal and Replacement Procedures- Slim Tower (ST) Chassis ✎ The computer automatically recognizes the additional memory when the computer is turned on. To reassemble the computer, reverse the removal procedure. ✎ If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. 7.9 Vertically Oriented Expansion Card 7.9.1 Expansion Card Retainer 1. Prepare the computer for disassembly (Section 7.1). 2. Remove the computer cover (Section 7.5). 3. Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on the latch and rotating the latch to the full open position 1. 4. Remove the single screw that keeps the card retainer in place 2 and slide the retainer to the left to remove it from the chassis 3. To install the card retainer, reverse the removal procedure. Service Reference Guide, dx7200 390812-001 7-13