Compaq dx7300 HP Compaq dx7300 Business PC Service Reference Guide, 1st Editio - Page 92
Front I/O Panel Housing Assembly
View all Compaq dx7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.11 Front I/O Panel Housing Assembly 1. Prepare the computer for disassembly (Section 6.1). 2. Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Section 6.3). 3. Disconnect three attaching cables from the system board: the power switch/LED cable, the front USB cable, and the front audio cable. 4. Remove the two screws that secure the housing to the chassis 1 then pull the housing away from the chassis 2. To install the housing assembly, reverse the removal procedures. 6-24 433611-001 Service Reference Guide, dx7300
6–24
433611-001
Service Reference Guide, dx7300
Removal and Replacement Procedures— Microtower (MT) Chassis
6.11 Front I/O Panel Housing Assembly
1. Prepare the computer for disassembly (
Section 6.1
).
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on (
Section 6.3
).
3. Disconnect three attaching cables from the system board: the power switch/LED cable, the
front USB cable, and the front audio cable.
4. Remove the two screws that secure the housing to the chassis
1
then pull the housing away
from the chassis
2
.
To install the housing assembly, reverse the removal procedures.