Compaq nx9000 Service Manual - Page 105
This applies only to HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500, models.
![]() |
View all Compaq nx9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Note This section applies only to HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500 models. Required Equipment • #1 Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove these additional assemblies: • Hard disk drive (page 2-9). • Keyboard cover (page 2-12). • Keyboard (page 2-16). • Switchboard PCA (page 2-18). • Display assembly (page 2-23). • Top case (page 2-26). 3. Remove the insulating tape that secures the floppy drive flex cable to the TouchPad bracket on the top case. 4. Remove the four M2.5×6.0 mm screws that secure the floppy drive and floppy drive bezel to the top case. 5. Remove the floppy drive. 6. Remove the M2.0×3.0 screw that secures the floppy drive bezel to the floppy drive. 7. Remove the floppy drive bezel. 2-34 Removal and Replacement Service Manual
![](/manual_guide/products/compaq-presario-1100-service-manual-1e8b977/105.png)