Computer Associates ARB6002700WF0. ..... Clients Agents Guide - Page 47
UNIX, Linux, and Mac OS X Client Agent Configuration File, Adding and Configuring the Client Agents - . .. means
UPC - 757943246315
View all Computer Associates ARB6002700WF0. ..... manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
UNIX, Linux, and Mac OS X Client Agent Configuration File For example: -CAUSER A: USER1 N: USER2 In this example, A means -ALLOW and N corresponds to -DENY. Option Description -DENY Use this option with Single User mode, with the -S or NOPASSWORD option, to define the IP addresses that are not allowed access to the client agents. For example: -DENY N:172.16.0.0(255.255.255.0) H:172.31.255.255 In this example, N denotes a network address and H denotes a host's IP address. You can set an optional subnet mask. Option -l -m maxbuf -NOPASSWORD -P n Description Causes the client agent to check for advisory locks. The default is mandatory locks only. Sets the number of buffers allocated for I/O. Options are 2 to 1024 buffers; the default is 128. Specify this option if you need to use either the -ALLOW, -DENY, or -CAUSER options. This option is the same as the -S option in Single User mode with no password required. Specifies the default time out, followed by a variable number (n), which is user-defined and measured in minutes (0 to 10). The default is 5 minutes. Adding and Configuring the Client Agents 47