Craftsman 11533 Operation Manual - Page 13
Maintenance, Accessories, Accessories Cont.
UPC - 033287137619
View all Craftsman 11533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
MAINTENANCE TO RETIGHTEN A LOOSE CHUCK (Figs. 18 and 18a) The chuck may become loose on the spindle and develop a wobble. Also, the chuck screw may become loose, causing the chuck jaws to bind and prevent them from closing. To tighten: 1. Lock the trigger switch by placing the Forward / Reverse Selector Switch with Power Lock-Off in the center, or OFF position. 2. Open the chuck jaws. 3. Insert the hex key into the chuck and tighten the chuck jaws securely. Tap the hex key sharply with a mallet in a clockwise direction. This will tighten the chuck on the spindle. 4. Open the chuck jaws, and remove the hex key. 5. Tighten the chuck screw in a counterclockwise direction. Fig. 18a 7 35 9 9 7 35 Fig. 18 Companion 1 Companion 1 ACCESSORIES ! WARNING: The use of attachments or accessories that are not recommended for this tool might be dangerous and could result in serious injury. Sears and other Craftsman® outlets offer a large selection of Craftsman and Companion drill/driver accessories designed for all your drill/driving applications. Kits and sets specifically designed for drilling and driving. Twist drill bit sets, variety insert (screwdriver) bit sets, spade bit sets, carbide-tipped masonry drill bit sets, extra long bits, magnetic bit holders and more. Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman for all of the accessories for your drill/driver. ACCESSORIES cont. BATTERIES The battery pack for this tool is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. The batteries in this tool have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. DO NOT disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn. To obtain the longest possible battery life, we suggest the following: 1. Remove the battery pack from the charger once it is fully charged and ready for use. For battery storage longer than 30 days: • Store the battery pack where the temperature is below 80°F • Store battery packs in a "discharged" condition BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING To preserve natural resources, please recycle or dispose of batteries properly. This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and / or disposal options. ! WARNING: Upon removal, cover the battery pack's terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and / or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and / or serious injury. Ni-Cd 24 25 10-4-07 Drill 10300-10400