Craftsman 11533 Operation Manual - Page 7

DESCRIPTION KNOW YOUR CORDLESS DRILL / DRIVER (Fig. 1) NOTE: Before attempting to use this product, familiarize yourself with all operating features and safety rules. Torque Adjustment Collar Bubble Level 9 Keyless Chuck Chuck Jaws Transformer 1 Charging Stand Trigger Switch On-Tool Bit Storage 7 35 Companion Forward/ Reverse Selector Switch with Power Lock-Off Slotted / Square Drive Phillips 2 Double ended Screwdriver Bits Red LED Light Green LED Light Latch to Release Battery Pack Battery Pack This Drill / Driver has many features for making its use more pleasant and enjoyable. Safety, performance and dependability have been given top priority in the design of this product, making it easy to maintain and operate. This Cordless Drill / Driver has the following features: 1. Forward / Reverse Selector Switch with Power Lock-Off This switch is located above and to the rear of the trigger switch. This switch has embossed arrows which show bit rotation (forward or reverse). Push switch completely to left or right for desired rotation. Push switch to center position to lock power off. This "lock power off" position helps reduce the possibility of accidental starting when your drill / driver is not in use or you are changing accessory bits. DESCRIPTION cont. This Cordless Drill / Driver has the following features cont.: 2. Keyless Chuck allows you to hand-tighten or loosen and release accessory bits in the chuck jaws without a chuck key. 3. Torque Adjustment Collar provides you with 15 + 1 different torque settings, ideal for driving different types of screws into different types of materials, and a setting for heavy (twist bit) drilling (most torque). 4. Electric Brake stops the bit rotation as soon as the trigger switch is released, ideal when driving screws. 5. Bubble Level help provide more accurate vertical and horizontal drilling and driving. 6. Magnetic Bit Tray for holding screwdriver bits. This tray is located at the front base of the drill / driver's handle and is handy for keeping the bits you are using on a project ready for use. 7. Soft-Grip Handle Insert provides positive gripping for maximum control and comfort. 8. Includes 2 Double Ended Scredriver Bits, 1 phillips and 1 slotted / square drive PRODUCT SPECIFICATIONS Model No. 10300: Chuck Motor Switch No Load Speed 3/8-in. keyless 9.6 Volt Variable Speed 0-500/min. Model No. 10400: Chuck Motor Switch No Load Speed 3/8-in. keyless 12.0 Volt Variable Speed 0-500/min. Clutch Torque Charger Input Charge Rate Clutch Torque Charger Input Charge Rate 15 + 1 Position Max. 80 in.-lbs. 120V, 60Hz AC 3 - 5 Hours 15 + 1 Position Max. 85 in.-lbs. 120V, 60Hz AC 3 - 5 Hours 12 13 10-4-07 Drill 10300-10400