Craftsman 24222 Owners Manual - Page 8
Assemble, Hopper, Clamps
View all Craftsman 24222 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
STEP 13 - ATTACH BAG BOTTOM , insert the bag frame strap into the stitched sleeve at the front edge of the bag bottom, See figure 11, BAG FRAME STRAP STITCHED SLEEVE Fold the bag flaps around the lower hopper tubes and attach to the bag bottom using the snaps, See figure 13, SNAP FIGURE 11 FIGURE 13 Assemble the bag frame strap to the holes in the lower hopper tubes using two clevis pins (O) and hair cotter pins (M), See figure 12, BAG FRAME STRAP CLEVIS PiN (O STEP 14 - ASSEMBLE HOPPER CLAMPS , Assemble two hopper mount clamps (Q) over the hole in the middle of each upper hopper tube using two carriage bolts (E) and two nylock nuts (F), Tighten only finger tight= See figure 14, 5/16" x 3/4" CARR{AGE BOLT (E) HOPPER MOUNT _ CLAMP (Q) UPPER HOPPER TUBE 5/16" NYLOCK NUT (F) FIGURE 12 FIGURE 14