Craftsman 27233 Operation Manual - Page 6

Figure A Figure B Grounding Lug g Plug is Connected to a Known Ground Grounding Prong __ Properly Grounded 3-Prong Outlet 2-PakroengSure This Receptacle FIGURE (A) Shows a 3-wire electrical plug and outlet that has a grounding conductor. If a properly grounded outlet is not available, an adapter (FIGURE B) can be used to temporarily connect this plug to a 2-contact ungrounded outlet. The adapter (FIGURE B) has a rigid lug extending from it that MUST be connected to a permanent earth ground, such as a properly grounded outlet box. The Canadian Electrical Code prohibits the use of adapters. USE ONLY 3-WIRE EXTENSION CORDS THAT HAVE 3-PRONG GROUNDING PLUGS AND 3-POLE RECEPTACLES THAT ACCEPT THE TOOL'S PLUG. If you have any doubts as to whether the tool is properly grounded or if the grounding instructions are unclear, check with a qualified electrician or service technician.When using a grounded tool around other ungrounded devices, be sure that the ungrounded devices are in good condition. An ungrounded device can function, yet have internal electrical problems that could cause a hazard when brought in contact with a grounded tool. THE ADAPTER SHOULD ONLY BE USED until a properly grounded outlet can be installed by a qualified electrician. AVAILABLE ACCESSORIES ' Visit your Sears Hardware Department or see the Craftsman Power and Handtcol Catalog for the fol_ov,ing brad nails: Sears Stock No. Lem In_;h mm, 27218 3/8 10 27216 3/4 20 27215 1 25 27214 1-3/16 30 These brad nails can be used for: Cabinet making Interior decorations Wood furniture building/repair Display assembly Picture frames Door & window trim NOTE: Use only brad nails recommended for this nailer. Using other sizes may be dangerous. Sears may recommend other accessories not listed in this manual. Do not use accessories unless you have completely read the instruction manual for that accessory. Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. Page 6