Craftsman 28813 Operation Manual - Page 31
TROUBLESHOOTING, CHART, See appropriate in manual unless directed, Sears service center
UPC - 071288130000
View all Craftsman 28813 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION 6 Faulty spark plug. 7 Dirty fuel filter. 6 Clean and regap or change spark plug. 7 Replace fuel filter. 8 Stale or dirty fuel. 9 Water in fuel. 10 Spark plug wire loose. 8 Empty fuel tank and refill tank witk fresh, clean gasoline. 9 Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. 10 Connect and tighten spark plug wire. 11 Dirty engine air screen/fins. 12 Dirty/clogged muffler. 11 Clean engine air screen/fins. 12 Clean/replace muffler. 13 Loose or damaged wiring. 14 Carburetor out of adjustment. 13 Check all wiring. 14 See "To Adjust Carburetor" in Service and Adjustments section. 15 Engine valves out of adjustment. Excessive vibration 1 Worn, bent or loose blade. 2 Bent blade mandrel. 15 Contact a Sears or other qualified service center. 1 Replace blade. Tighten blade bolt 2 Contact a Sears or other qualified service center. 3 Loose/damaged part(s). 3 Tighten loose part(s). Replace damaged parts. Engine continues tc 1 run when operator leaves seat with attachment clutch engaged Faulty operator-safety control system. presence 1 Check wiring, switches and connections. If not corrected, contact a Sears or other Poor cut - uneven cutting Mower blades will not rotate 1 Worn, bent or loose blade. 1 Replace blade. Tighten blade bolt 2 Mower deck not level. 2 Level mower deck. 3 Buildup of grass, leaves, and trash under mower. 3 Clean underside of mower housing. 4 Bent blade mandrel. 4 Contact a Sears or other qualified service center. 5 Clogged mower deck vent from build-up of grass, leaves, and trash around mandrels. Clean around mandrels to open vent holes. 1 Obstruction in clutch mechanism. 1 Remove obstruction. 2 Worn/damaged mower drive belt. 2 Replace mower drive belt. Poor grass discharge 3 Frozen idler pulley. 4 Frozen blade mandrel. 1 Engine speed too slow. 2 Travel speed too fast. 31 3 Replace idler pulley. 4 Contact a Sears or other qualified service center. 1 Place throttle control in "FAST" position. 2 Shift to slower speed.