Craftsman 38906 Owners Manual - Page 8

The operation of any lawn, SAFETY, GLASSES, mower can result - high wheel

Page 8 highlights

The operation of any lawn SAFGELTAYSSEmSower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while oper- ating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses orwide vision safety mask worn over spectacles. HOW TO USE YOUR LAWN MOWER ENGINE SPEED Engine speed was set at the factory for optimum performance. It is not adjustable. ENGINE ZONE CONTROL _I, CAUTION" Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running. • Your lawn mower is equipped with an operator presence control bar which requires the operator to be positioned behind the lawn mower handle to start and operate the lawn mower. TO ADJUST CUTTING HEIGHT Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit your requirements. Medium position is best for most lawns. • To change cutting height, squeeze adjuster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels are in the same setting. NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9position adjusters (if so equipped) allow lever to be positioned between the plate tabs. LEVER BACKWARD TO LOWER MOWER Plate tab • To convert to mulching or discharging operation, remove grass catcher and close rear door. Pivot pins Rear Grass catcher handle Catcher frame hook SIDE DISCHARGING • Rear door must be closed. • Open mulcher door and install dis- charge deflector under door as shown. • Mower is now ready for discharging operation. • To convert to mulching or bagging opera- tion, discharge deflector must be removed and mulcher door must be closed. SIMPLE STEPS TO REMEMBER WHEN CONVERTING YOUR LAWN MOWER FOR MULCHING 1. Rear door closed. 2. Mulcher door closed. FOR REAR BAGGING 1. Grass catcher installed. 2. Mulcher door closed. FOR SIDE DISCHARGING - 1. Rear door closed. 2. Discharge deflector installed. ACAUTION" Do not run your lawn mower without rear door closed, clipping deflector or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open. LEVER FORWARD TO RAISE MOWER Lever TO CONVERT MOWER Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging: Open mulcher door REAR BAGGING • Lift rear door of the lawn mower and place the grass catcher frame hooks onto the door pivot pins. Install discharge 8 deflector

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

The operation of any lawn
SAFETY
GLASSES
mower can result
in
foreign
objects
thrown into the eyes,
which
can
result
in severe
eye
damage.
Always
wear
safety
glasses
or
eye
shields
while
oper-
ating
your
lawn
mower
or performing
any
adjustments
or repairs.
We recommend
a
standard safety glasses orwide
vision safety
mask worn
over spectacles.
HOW
TO
USE YOUR
LAWN
MOWER
ENGINE
SPEED
Engine
speed
was set at the factory
for
optimum
performance.
It is not adjustable.
ENGINE
ZONE
CONTROL
_I, CAUTION"
Federal
regulations
require
an engine
control
to be installed
on this
lawn mower
in order to minimize
the
risk of blade
contact
injury.
Do not under
any circumstances
attempt
to defeat
the
function
of the operator
control.
The blade
turns when
the engine
is running.
Your lawn mower
is equipped
with an
operator
presence
control
bar which
requires
the operator
to be positioned
behind the lawn mower
handle to start
and operate
the lawn
mower.
TO ADJUST
CUTTING
HEIGHT
Raise wheels
for low cut and lower wheels
for high cut, adjust
cutting
height to suit
your requirements.
Medium
position
is
best for most lawns.
To change
cutting
height,
squeeze
ad-
juster
lever
toward
wheel.
Move
wheel
up or down to suit your requirements.
Be
sure all wheels
are in the same
setting.
NOTE: Adjuster
is properly positioned
when
plate
tab inserts
into hole in lever. Also,
9-
position adjusters
(if so equipped)
allow lever
to be positioned
between
the plate tabs.
LEVER BACKWARD
TO LOWER
MOWER
Plate tab
To convert
to mulching
or discharging
operation,
remove
grass catcher
and
close rear door.
Pivot pins
Rear
Grass
catcher
handle
Catcher
frame
hook
SIDE
DISCHARGING
Rear door must be closed.
Open
mulcher
door and install
dis-
charge
deflector
under door as shown.
Mower
is now ready for discharging
operation.
To convert
to mulching
or bagging
opera-
tion, discharge
deflector
must be removed
and mulcher
door must be closed.
SIMPLE
STEPS
TO REMEMBER
WHEN
CONVERTING
YOUR
LAWN MOWER
FOR MULCHING
-
1.
Rear door closed.
2.
Mulcher
door closed.
FOR REAR
BAGGING
-
1.
Grass
catcher
installed.
2.
Mulcher
door closed.
FOR SIDE
DISCHARGING
-
1.
Rear door closed.
2.
Discharge
deflector
installed.
ACAUTION"
Do not run your lawn mower
without
rear door closed,
clipping
deflector
or approved
grass catcher
in place.
Never
attempt
to operate
the lawn mower with the
rear door removed
or propped
open.
LEVER
FORWARD
TO RAISE
MOWER
Lever
TO CONVERT
MOWER
Your lawn mower was
shipped
ready to be
used as a mulcher.
To convert
to bagging
or discharging:
REAR
BAGGING
Lift rear door of the lawn mower
and
place the grass catcher
frame
hooks
onto the door pivot pins.
Open
mulcher
door
Install
discharge
8 deflector