Craftsman 7174827 Operation Manual - Page 7
thefabricofthebag,suchaswires
UPC - 021038992259
View all Craftsman 7174827 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
thefabricofthebag,suchaswires, staplesn,ailso, rrocks EmptyintgheBag 1. Turn off and unplug the vacuum from the power source.. 2. Unzip and empty any debris from the bag. • _ _._ _, ImportanVt: acuumonlyleaveasndsoft itemsH. arditemssuchassticksr,ocks, acornsa,ndpineconews illdamagtehe impeller ImportantD: onotforcethevacuumtube intoapileof debriosrholdthetubeupright whileforcefeedindgebrisintothetube. Eithear ctionmaycloganddamagtehe impelleIrfthevacuumstartstovibrateor makeabnormnaol ises,topit,unplugthe corda, ndcheckforthecause, Do not store debris in the bag., To clean the bag, turn it inside out and shake out any excess debris, Once a year, hand wash the bag in soapy water and allow it to air dry _t, DANGER: Normal usage of the bag causes it to wear and deteriorate over time, A worn or deteriorated bag allows small objects to be thrown through the bag, possibly injuring the operator or bystanders° Check the bag frequently. If it is worn or deteriorated, replace it with a genuine Craftsman vacuum bag; refer to the Replaceable Parts List. Double*insulated Appliances tn a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by the qualified service personnel at your Sears Service Center (refer to the back cover). Replacement parts for a double-insulated appliance must be identical to the parts they replace. A double-insulated appliance is marked with the words "Double Insulation" or "Double Insulated.." The symbol (square within a square) [] may also be marked on the appliance. Removing Clogged Debris from the Impeller I., Turn off and unplug the vacuum from the power source and wait for all moving parts to stop., 7