Craftsman 77236100N Operation Manual - Page 26
Need Assistance?
View all Craftsman 77236100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
PROBLEM Engine difficult to start or Engine runs erratically or Engine will not run at full speed CAUSE Stale fueJ Dirt in fuel tank or out of fue i Carburetor out of adjustment Engine smokes excessively Cutting blade will not rotate Blade will not cut properly Fouled spark plug Dirty air filter Dirty air filter Debris interferes with blade Loose blade Damaged V-belt Damaged quill bearings Excessive vibration Damage or worn blade Loose parts CORRECTION Drain fuel tank. Fill with fresh fuel. Drain and clean fuel tank. Fill with fresh i uel. Contact a Sears or other qualified service dealer. Clean and set spark plug gap. Clean or replace air filter. Clean or replace air filter. Clean debris from blade. Tighten blade nut. Replace V-belt, Replace the quill assembly. Contact a Sears or other qualified service dealer. Replace the blade. Stop engine immediately. Tighte nal fasteners. If vibration continues, take the unit to a Sears or other qualified service dealer. Need Assistance? Call 1-800-4-MY-HOME_ (1-800-469-4663) 26