Craftsman CRAFTSMAN Owners Manual - Page 9

SWITCH LOCK The switch trigger can be locked in OFF position. This feature helps reduce the possibility of accidental starting when not in use. VARIABLE SPEED This tool has variable speed switch that delivers higher speed with increased trigger pressure. Speed is controlled by the amount of switch trigger depression. FORWARD/REVERSE SELECTOR (DIRECTION OF ROTATION SELECTOR) Your impact wrench has a forward/ reverse selector located above the switch trigger. Figure 4: Battery Pack Installation • Align raised ribs on battery pack with grooves on bottom of impact wrench, and then attach battery pack to impact wrench. • Make sure latch on battery pack snaps into place and battery pack is secured to impact wrench before beginning operation. Figure 3:Forward/Reverse Selector and Trigger A. Forward/Reverse Selector B. Switch Trigger WRIST STRAP A wrist strap is provided to reduce the chances of dropping your impact wrench. Place one hand through the wrist strap when carrying tool. TO ATTACH BATTERY PACK TO IMPACT WRENCH NOTE:Battery pack is shipped in a low charge condition. Therefore, it must be charged prior to use. Refer to charging instructions. CAUTION: When attaching battery pack to your impact wrench, be sure raised ribs and grooves align properly and latch snaps into place properly. Improper assembly can cause damage to impact wrench and battery pack. TO REMOVE BATTERY PACK FROM IMPACT WRENCH Figure 5: Battery Pack Removal 9