Creative 70EM874006000 Owners Manual - Page 13
Controls & Headphone Output, Direct Monitor On/Off & Mono-Stereo Switch
UPC - 054651129221
View all Creative 70EM874006000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Controls & Headphone Output CONTROLS & HEADPHONE OUTPUT 1 2 3 4 5 6 1. Signal Level & Clip Indicators The LED signal level indicators show that you are inputing a proper signal level. With a proper input level, the green signal LED should be flickering, but the red clip indicator should NOT ever be lit. The clip indicators light and show that the input level has exceeded0 dBFS. 2. Left/Right Gain Controls These controls set the input gain from 0dB to +60dB for the two inputs. 3. Direct Monitor Level Control This continuous encoder controls the amount of direct monitor signal mixed into the outputs. The level is adjustable from -24dB to off. 4. Direct Monitor On/Off & Mono-Stereo Switch Press the button to turn Direct Monitoring on and off and to switch modes. The stereo LED illuminates. The left and right channels are passed through to their respective outputs at the level set by the Direct Monitor Level control. Press the button again to sum the left and right direct monitor channels to mono. Mono mode is useful when the two inputs are being used for separate instruments. See "Direct Monitoring" on page 16. 5. Headphone Jack Connect your stereo headphones here. 6. Headphone Level Control This knob controls the volume of the headphone output. This switch also turns the 0202 USB 2.0 on or off. 0202 USB 2.0 Owner's Manual 13