Cuisinart CAP-1000 User Manual - Page 4

To Operate Your Air Purifier, Removing The Filters

Get Cuisinart CAP-1000 PDF manuals and user guides View all Cuisinart CAP-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

TO OPERATE YOUR AIR PURIFIER 1. Place the CAP-1000 air purifier on a sturdy, flat surface. 2. Make sure the unit is plugged in. 3. Turn On: Press the Power ON button. 4. 4 Fan Speeds: Select or change fan speed (choose 1, 2, 3, and 4). Start by pressing the fan speed button, continue pressing until you have reached your desired setting, then release the button. 5. 12-Hour Timer Function: To select the desired time, press the timer button. The timer will show settings ranging from 1 hour - 12 hours and off. If there is no time selected, the timer will be off. The unit will continue to run until the power is turned off. 6. Child Safety Lock: This can be activated by pressing and holding the lock button for 3 seconds. All buttons on the air purifier will now be in locked mode. To take the unit off locked mode, simply hold the lock button again for 3 seconds and the unit will now be unlocked. 7. Sleep Mode/Night Light: To activate the night light press once. The blue night light will illuminate along with the control panel lights. To activate Sleep Mode. Press the icon a second time, and the Moon symbol will illuminate in addition to the night light. Press the icon one more and only the moon icon will be illuminated. 9. Filter Replacement Light: The filter replacement light will illuminate in RED when it is it is time to replace the HEPA H13 and active carbon filters on the unit. The filter light will illuminate after 2,500 hours of continuous use. 10. U V-C Light: The UV-C light will illuminate automatically when the unit is turned on. Press the button once to turn off the UV-C light. Note: Utilizing an H13 High-Grade HEPA filter does not make this a medical device. REMOVING THE FILTERS Always unplug your Cuisinart Purxium Air Purifier from the electrical outlet before replacing or removing filters. To replace the Purxium™ Air Purifier filters, you will first need to unplug the unit and remove the back panel. To remove the back panel, squeeze the latch at the top of the door panel and tilt the door panel down to remove. Once removed, you can slide out the entire 4-sided H13 HEPA filter system. Your filter system comes with 4 removable, reusable metal pre-filters. Slide each of the 4 filters out from the main filter housing and hand wash them in warm soapy water. Be sure to dry them thoroughly before using with your new replacement filter. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
4
TO OPERATE YOUR AIR PURIFIER
1.
Place the CAP-1000 air purifier on a sturdy, flat surface.
2.
Make sure the unit is plugged in.
3.
Turn On:
Press the Power ON button.
4.
4 F
an Speeds:
Select or change fan speed (choose 1, 2, 3, and 4).
Start by pressing the fan speed button, continue pressing until you
have reached your desired setting, then release the button.
5.
12-Hour Timer Function:
To select the desired time, press the timer
button. The timer will show settings ranging from 1 hour – 12 hours
and off. If there is no time selected, the timer will be off. The unit will
continue to run until the power is turned off.
6.
Child Safety Lock:
This can be activated by pressing and holding
the lock button for 3 seconds. All buttons on the air purifier will now
be in locked mode. To take the unit off locked mode, simply hold the
lock button again for 3 seconds and the unit will now be unlocked.
7.
Sleep Mode/Night Light:
To activate the night light press once. The blue
night light will illuminate along with the control panel lights. To activate Sleep
Mode. Press the icon a second time, and the Moon symbol will illuminate in
addition to the night light. Press the icon one more and only the moon icon
will be illuminated.
9.
Filter Replacement Light:
The filter replacement light will illuminate in RED
when it is it is time to replace the HEPA H13 and active carbon filters on the
unit. The filter light will illuminate after 2,500 hours of continuous use.
10.
UV-C Light:
The UV-C light will illuminate automatically when the unit is
turned on. Press the button once to turn off the UV-C light.
Note:
Utilizing an H13 High-Grade HEPA filter does not make this a medical device.
REMOVING THE FILTERS
Always unplug your Cuisinart Purxium Air Purifier from the electrical outlet
before replacing or removing filters.
To replace the Purxium™ Air Purifier filters, you will first need to unplug the unit
and remove the back panel. To remove the back panel, squeeze the latch at the
top of the door panel and tilt the door panel down to remove. Once removed,
you can slide out the entire 4-sided H13 HEPA filter system. Your filter system
comes with 4 removable, reusable metal pre-filters. Slide each of the 4 filters out
from the main filter housing and hand wash them in warm soapy water. Be sure
to dry them thoroughly before using with your new replacement filter.