Cuisinart CBM-20 User Guide - Page 9
Cleaning/maintenance, Instructions
View all Cuisinart CBM-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
CLEANING/MAINTENANCE INSTRUCTIONS NOTE: If your unit stops grinding, the chute may be clogged. To unclog, first unplug your grinder and then use the scoop brush to clear out the chute of excess grounds. HOPPER 1. Unplug unit. 2. Beans can be removed from the hopper by lifting off the lid and rotating the knob to the "unlock" position. Once unlocked, the hopper can be removed to pour out remaining beans. BURR GRINDER 1. After removing hopper, if some beans remain in the grinder, put hopper back on, re-insert the grind container or filter and run a grind cycle for 8 cups on any grind setting. Once finished, you can continue cleaning as instructed. 2. R otate the grind selector dial counterclockwise until dial stops. OFF will be indicated on LCD. 3. Unplug unit. 4. R emove the bean hopper lid and turn the lock/unlock dial counterclockwise to release the bean hopper. NOTE: You will notice the release arrow and arrow on the burr on the inside of unit are now aligned. They must be aligned in order to re-insert the hopper. 5. O nce the bean hopper has been removed, remove the burr grinder by grasping the metal handle and lifting up. Use the brush to remove grinds or wash by hand. Replace the burr grinder on the unit and rotate until the piece is fully inserted. Push handle down, replace and lock hopper. Note: The hopper will not attach to the unit if the grinder has not been fully inserted. The brush on the measuring scoop is only for cleaning purposes. 6. Wipe body of grinder with a damp cloth. NOTE: T he bean hopper, bean hopper lid, grind chamber, and grind chamber lid can be washed by hand with hot, soapy water or placed in the top shelf of a dishwasher. Dry thoroughly. MAINTENANCE Any other servicing or maintenance should be performed by an authorized service representative. WARNING: NEVER IMMERSE UNIT IN WATER. 9