Cuisinart CGG-049 User Manual - Page 5

Step 6, Step 9, Step 4, Step 7, Step 5, Step 8

Get Cuisinart CGG-049 PDF manuals and user guides View all Cuisinart CGG-049 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

4. Assembly Instructions (cont.) Step 4: Install the push button assembly (E) onto the firebox with screws (AA) as shown. Step 5: Attach the handle (A) to the lid as shown. Step 6: The burner assembly (F) is comprised of a round burner, a gas tube and a mounting bracket. Slide the gas tube end of the burner throughout the hole in the bottom side of the firebox and lineup the mounting bracket with the screw hole at the bottom center of the firebox. Screw the burner tightly onto the firebox. Step 7: Slide the ignition wire from the push button assembly through the hole in the front of the firebox. Connect the wire to the end of the electrode (G) and secure it on the burner with screw (AA) as shown Step 8: Rest the cooking grate (K) on the brackets in the firebox as shown. Make sure the indents on the grate line up with the hinges inside the grill. Step 9: Insert and screw the regulator (J) to the tubing end of the burner. 8 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
4. Assembly Instructions (cont.)
Step 6:
The burner assembly (F) is comprised of a round burner, a gas tube and a mounting
bracket.
Slide the gas tube end of the burner throughout the hole in the bottom side of
the firebox and lineup the mounting bracket with the screw hole at the bottom center of
the firebox. Screw the burner tightly onto the firebox.
Step 9:
Insert and screw the regulator (J)
to the tubing end of the burner.
Step 4:
Install the push button
assembly (E) onto the firebox
with screws (AA) as shown.
Step 7:
Slide the ignition wire from
the push button assembly
through the hole in the front of
the firebox.
Connect the wire
to the end of the electrode (G)
and secure it on the burner
with screw (AA) as shown
Step 5:
Attach the handle (A)
to the lid as shown.
Step 8:
Rest the cooking grate (K) on the
brackets in the firebox as shown.
Make sure the indents on the grate
line up with the hinges inside the grill.
8
9