Cuisinart CGG-403 User Manual - Page 10

ASSEMBLY INSTRUCTIONS STEP 10 Attach the regulator with hose to the propane cylinder by turning the regulator handle clockwise as shown below. If the unit is not in use, the gas must be turned "OFF" at the propane cylinder. • Check all gas supply fitting for leaks before each use. Do not use the grill until all connections have been checked and do not leak (see "Leak Testing" instructions on page 14) • Place the grill on table as shown below. We recommend using this grill on a 32" high table. 32" OPERATING THE GRILL PIZZA OVEN MODE Insert the grill grate (9) into the unit upside down so the riser pegs are facing up. • Position the pizza stone (10) into the indentation in the center of the grill grate. The riser pegs will secure the pizza stone in place. See image below. • Shut the lid, close the pizza door, and preheat the stone on high for 15 minutes. • Before placing your pizza in, turn the control knob to the "PIZZA" setting on the dial. • Open the front pizza door and use a pizza peel to place the pizza in to the oven and center it on the stone. NOTE: Dust your pizza peel with flour or cornmeal to prevent sticking when transferring pizzas to and from the stone. • Keep pizza door and lid closed while pizza is cooking. • Cook for 6-8 minutes or until desired doneness is reached. • Turn your pizza once 180 degrees half way through cook time (at 3-4 minutes) to ensure even cooking. 10 9 ! Note: Wait for unit to completely cool down before switching out any cooking surfaces. 10