Cuisinart CMW-100 CMW-100 Manual - Page 5

WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If installed near or over a heat source, the oven could be damaged and the warranty would be void. CONTROL PANEL AND FEATURES 1. AM/PM 2. Memory 3. Kitchen Timer 4. Auto Defrost 5. Time Defrost 6 Auto Menu 7. Number Keys 8. Clock/Pre-Set 9. Power 10. Stop/Clear Clears all previous settings pressed before cooking starts. During cooking, press once to stop oven; twice to stop and clear all entries. 11. Start/+30 seconds OPERATION 1. Power Level Ten power levels are available. Level 10 9 8 7 6 5 4 3 2 1 Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% Display PL10 PL9 PL8 PL7 PL6 PL5 PL4 PL3 PL2 PL1 Note: If you want to set the power level to something other than high, press the power button repeatedly until desired power level is reached. Power counts down from high to low. Use number buttons to set a cooking time. You can set a time from one second 6. 7. 1. 2. 8. 9. 3. 4. 10. 5. 11. to 99 minutes, 99 seconds. To set a time over one minute enter the seconds too. For example, to set 30 minutes, enter 3-0-0-0. 2. Setting the clock/pre-set a. Press the clock button. b. Enter the time using 4 digits; for example, for 2:21pm, press 0-2-2-1. c. Press the AM/PM button to select AM/PM. d. Press Clock button to set. 3. Kitchen Timer a. Press KITCHEN TIMER. LED will display 00:00, and clock indicator will be lighted. The first "0" will flash; ":" and the other "0" will be lighted. b. Press the number keys to enter the desired cooking time (the maximum cooking time is 99 minutes and 99 seconds). c. Press START/+30SEC. to confirm setting. Clock indicator will be lighted. d. When the cooking time is finished, clock indicator will go out and the buzzer will ring 5 times. 8 4. Microwave cooking a. Press POWER repeatedly to select microwave power. and or will show on display. b. Press number keys to enter the cooking time; the maximum cooking time is 99 minutes and 99 seconds. c. Press START/+30SEC. to start cooking, and the remaining cooking time will be displayed. ":", , or indicators will be flashing. Note: In the process of cooking, if the STOP/CLEAR button is pressed or if there is no operation within 1 minute, the oven will go back to the former setting automatically. 5. Express Cooking a. For quick starting, instant cooking at 100% power level can be started by selecting a cooking time from 1 to 6 minutes by pressing Express Cook number pads 1 to 6. Press START/+30SEC. to increase the cooking time; the maximum cooking time is 99 minutes and 59 seconds. b. For quick starting, instant cooking at 100% power level with 30 seconds' cooking time can be started by pressing START/+30SEC. Each press on the same button will increase cooking time by 30 seconds. The maximum cooking time is 99 minutes and 59 seconds. Note: Each press on START/+30SEC. will increase the cooking by 30 seconds for the microwave and Auto menu cooking. However, the operation will not work with Auto Defrost operation. 6. Auto Defrost a. Press AUTO DEFROST. LED will display "dEF1". At the same time, , indicators will be lighted. b. Press numerical pads to enter weight of food to be defrosted. "Oz" indicator will be lighted. Enter the weight between 4 and 100 oz. c. If the weight entered is not between 4 to 100, the entry will be invalid. No beep will sound and the microwave will not work until valid numbers are entered. d. Press START/+30SEC. to start defrosting and the remaining cooking time will be displayed. ":", and indicators will be flashing and the "Oz" indicator will go out. 7. Defrosting by Time a. Press TIME DEFROST. LED will display "dEF2". At the same time, , indicators will be lighted. b. Press number keys to enter defrosting time. The time range is 00:01 to 99:99 minutes. c. If the time entered is not within 0:01 to 99:99, no beep will sound and the microwave will not work until valid numbers are entered. d. The default microwave power is power level 3. If you want to change the power level, press POWER once, and the LED will display "PL 3", then press the number pad for the power level you want. e. Press START/+30SEC. to start defrosting. The remaining cooking time will be displayed. ":" and indicators will be flashing. 8. Memory Function a. Press MEMORY to choose memory 1-5 procedure. The LED will display 1,2,3...5. b. If the procedure has been set, press Start/ +30 Sec. to use it. If not, continue to set the procedure. c. After setting, press MEMORY to save the procedure and turn back to the stand-by state. If you press Start/ +30 Sec., it will save the setting and run the procedure. 9