Cuisinart DCC-T20P1 User Manual - Page 7

REVEAL SCREEN TECHNOLOGY The control panel becomes invisible when unit is in idle mode - making this a statement piece in your kitchen. To select your options, simply touch the icon to wake up your screen and choose how you want to brew! BEFORE BREWING YOUR FIRST POT OF COFFEE Rinsing your coffeemaker: During the manufacturing process, dust can get trapped in the unit. We recommend flushing out the system before brewing your first pot of coffee. Simply fill the water reservoir, power on the unit, and follow steps 1, 3 and 5 on page 8 under MAKING COFFEE. Do not add coffee! 1. Idle mode option 1 CLOCK ON. 2. Idle mode option 2 CLOCK OFF. 3. Wake mode Once has been pressed. Charcoal Water Filter Your coffeemaker comes with a charcoal water filter that eliminates chlorine, bad tastes and odors from tap water. Inserting the Water Filter • Remove the filter from polybag and soak it, fully immersed, in cold tap water for 15 minutes. • Lift the water filter holder out of the water reservoir. • Press down on the filter compartment and pull toward you to open. • Place filter into the holder and snap it closed. Be careful - improper placement can tear the filter skin. • Flush filter by running cold tap water through holes in bottom of compartment for 10 seconds. • Allow the filter to drain completely. • Slide the water filter holder back into the channel in the water reservoir, pushing it down to the base of the unit. Note: We recommend changing the water filter every 60 days or after 60 uses, and more often if you have hard water. Replacement filters can be purchased in stores, by calling Cuisinart Consumer Service, or at www.cuisinart.com 7