Cuisinart DCC-T20P1 User Manual - Page 8
Programming Your, Coffeemaker, Making Coffee
![]() |
View all Cuisinart DCC-T20P1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PROGRAMMING YOUR COFFEEMAKER SETTING THE CLOCK When the coffeemaker is plugged in, the power icon and 12:00 will illuminate. Simply tap the power icon to view all options. Setting Hours and Minutes Press and hold either HR or MIN icons for 2 seconds until clock starts to flash. Hold icon down to scroll through the digits quickly, or touch and release to advance one digit at a time until the desired time is reached. Be sure the PM indicator is on if setting a PM time. Turning ON/OFF the Clock in Idle Mode When the unit is idle, you have the option to have the clock display on or off. Press and hold the HR and MIN icons for 3 seconds - clock display will go off. To turn back on, press and hold the HR and MIN icons for 3 seconds. Clock display will turn on. SETTING THE AUTO ON TIME 1. Press and hold the Auto On icon for 2 seconds. The digital display will flash the default (12:00) or previously selected time. Follow directions under SETTING THE CLOCK (above) to program your brew-start time. Ten seconds after programming, the unit will automatically exit Auto On or you can touch the Auto On icon to exit setting mode immediately. The Auto On icon will illuminate, letting you know Auto On is activated. 2. To activate Auto On using previously selected time: Press the Auto On icon for 2 seconds. The previously set time will appear and icon will light up. 3. To deactivate Auto On: Press illuminated Auto On icon; light will go off, indicating mode is turned off. coffeemaker to shut off from 0 to 4 hours after brew cycle is finished. 2. To exit/confirm Auto Off time setting: Do not touch any icons. Auto Off setup mode will be exited automatically after 5 seconds. TURNING OFF READY TONE Your coffeemaker features a Ready Tone that beeps 5 times when coffee is finished brewing. To turn this alert off, press the Ready Tone icon; an icon will appear next to the time with an "X", indicating the tone is off. To turn tone back on, press Ready Tone icon again; the "X" will disappear. MAKING COFFEE Follow instructions in BEFORE BREWING YOUR FIRST POT OF COFFEE (page 7). 1. Fill the water reservoir Lift the coffeemaker lid to open. Pour the desired amount of water into the water reservoir using the water level indicator located at the side of the coffeemaker. 2. Add the ground coffee Insert a #4 paper filter OR the gold-tone filter. Be sure that the paper filter is completely open and fully inserted in the basket. It may help to fold and flatten the seams of a paper filter beforehand. Add 1 level scoop of ground coffee per cup. Adjust the amount according to taste. SETTING THE AUTO OFF TIME 1. Press and hold the Brew/Auto Off icon for 5 seconds. The digital display will flash the programmed Auto Off default (2:00) or previously selected time. Follow directions under SETTING THE CLOCK to program 8
![](/manual_guide/products/cuisinart-dcct20p1-user-manual-1335c8c/8.png)