Cuisinart DLC 2011 DLC-2011BKN Manual - Page 10

Cup Food Processor. - 11 cups food processor

Page 10 highlights

obtain. If completely dry when chopped, parsley and other herbs will keep for at least 4-5 days, stored in an airtight bag in the refrigerator. They may be frozen for months, stored in an airtight container or bag. To chop peel from citrus fruit or to chop sticky fruit like dates or raisins: For citrus, remove only the peel with a vegetable peeler, not the white pith which is bitter tasting. Cut the peel into lengths of 2 inches (5cm) or less and process with 1/2 cup (125 ml) of granulated sugar until finely chopped. This may take 2 minutes or longer. For sticky fruit like dates, raisins, prunes and candied fruit, first freeze the fruit for about 10 minutes. Add some of the flour called for in the recipe to the fruit. Use no more than 1 cup (250 ml) of flour for each cup of fruit. To chop meat, poultry, fish and seafood: The food should be very cold, but not frozen. Cut it into 1-inch (2.5cm) pieces to ensure an even chop. Using the ON button, process no more than the recommended amount at one time (see table inside front cover). Press the PULSE button 3 or 4 times at a rate of 1 second on, 1 second off. If the food is not chopped fine enough, let the processor run continuously for a few seconds. Check the texture often to avoid overprocessing. Use a spatula to scrape food 9 from the sides of the bowl as necessary. To purée meat, poultry, fish and seafood: Prepare the food as described above. Press the PULSE button until evenly chopped, then process continuously to the desired texture. Scrape the bowl with a spatula as needed. Leave the purée in the work bowl and add eggs, cream and seasonings as called for by the recipe. Process to combine thoroughly. Remember, you control texture by the length of time you process. By varying the processing time, you can get a range of textures suitable for hamburgers, hash, stuffed peppers, or smooth mousses. To chop nuts: Chop no more than the recommended amount at one time. Press and release the PULSE button and check frequently to avoid nuts clumping together in a nut butter. When a recipe calls for flour or sugar, add some to the nuts before you chop, about 1/2 cup for each cup of nuts. This allows you to chop the nuts as fine as you want without turning them into a nut butter. You can also chop nuts with a shredding disc. The optional Fine Shredding Disc is particularly good. To make peanut butter and other nut butters: Process up to the recommended amount of nuts. Using the ON button, let the machine run continuously. After 2 or 3 minutes, the ground nuts will form a ball that will gradually smooth out. Scrape the sides of the bowl and continue processing until drops of oil are visible. Taste for consistency. The longer you process, the softer the butter. For chunk style, add a handful of nuts just after the ball of nut butter begins to smooth out. To make cashew butter, add a little bland vegetable oil. Processor nut butters contain no preservatives. Store in refrigerator to keep from separating. To make flavored butters, spreads and dips: Cut room temperature butter into tablespoon size pieces. Finely chop flavoring ingredients first, such as anchovies, cheese, herbs, etc. Be sure work bowl is clean and dry. Add small hard ingredients like garlic and hard cheese through the feed tube while machine is running. Next, add the butter and process using the ON button, until smooth. Add any liquid ingredients last, while the processor is running, and process just long enough to blend. Process ingredients for spreads and dips the same way. They should be at room temperature and cut into 1-inch (2.5cm) cubes, or added by tablespoonfuls To make mayonnaise: You can make foolproof homemade mayonnaise with your Premier Series 11 Cup Food Processor. The work bowl and metal blade must be clean and dry. Use the metal blade to process

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

obtain. If completely dry
when chopped, parsley and
other herbs will keep for at
least 4-5 days, stored in an
airtight bag in the refrigera-
tor. They may be frozen for
months, stored in an air-
tight container or bag.
To chop peel from citrus
fruit or to chop sticky
fruit like dates or raisins:
For citrus, remove only
the peel with a vegetable
peeler, not the white pith
which is bitter tasting.
Cut the peel into lengths
of 2 inches (5cm) or less
and process with 1/2 cup
(125 ml) of granulated
sugar until finely chopped.
This may take 2 minutes
or longer.
For sticky fruit like dates,
raisins, prunes and candied
fruit, first freeze the fruit for
about 10 minutes. Add
some of the flour called for
in the recipe to the fruit.
Use no more than 1 cup
(250 ml) of flour for each
cup of fruit.
To chop meat, poultry,
fish and seafood:
The food should be very
cold, but not frozen. Cut
it into 1-inch (2.5cm) pieces
to ensure an even chop.
Using the ON button,
process no more than the
recommended amount at
one time (see table inside
front cover). Press the
PULSE button 3 or 4 times
at a rate of 1 second on,
1 second off. If the food is
not chopped fine enough,
let the processor run
continuously for a few
seconds.
Check the texture often to
avoid overprocessing. Use
a spatula to scrape food
from the sides of the bowl
as necessary.
To purée meat, poultry,
fish and seafood:
Prepare the food as
described above. Press the
PULSE button until evenly
chopped, then process
continuously to the desired
texture. Scrape the bowl
with a spatula as needed.
Leave the purée in the
work bowl and add eggs,
cream and seasonings as
called for by the recipe.
Process to combine
thoroughly.
Remember, you control
texture by the length of
time you process. By
varying the processing
time, you can get a
range of textures suitable
for hamburgers, hash,
stuffed peppers, or
smooth mousses.
To chop nuts:
Chop no more than the
recommended amount at
one time. Press and
release the PULSE button
and check frequently to
avoid nuts clumping
together in a nut butter.
When a recipe calls for
flour or sugar, add some to
the nuts before you chop,
about 1/2 cup for each cup
of nuts. This allows you to
chop the nuts as fine as
you want without turning
them into a nut butter. You
can also chop nuts with a
shredding disc. The
optional Fine Shredding
Disc is particularly good.
To make peanut butter
and other nut butters:
Process up to the
recommended amount
of nuts. Using the ON
button, let the machine run
continuously. After 2 or 3
minutes, the ground nuts
will form a ball that will
gradually smooth out.
Scrape the sides of the
bowl and continue process-
ing until drops of oil are vis-
ible. Taste for consistency.
The longer you process,
the softer the butter. For
chunk style, add a handful
of nuts just after the ball of
nut butter begins to smooth
out. To make cashew but-
ter, add a little bland veg-
etable oil. Processor nut
butters contain no preserv-
atives. Store in refrigerator
to keep from separating.
To make flavored butters,
spreads and dips:
Cut room temperature
butter into tablespoon size
pieces. Finely chop flavor-
ing ingredients first, such
as anchovies, cheese,
herbs, etc. Be sure work
bowl is clean and dry. Add
small hard ingredients like
garlic and hard cheese
through the feed tube while
machine is running. Next,
add the butter and process
using the ON button, until
smooth. Add any liquid
ingredients last, while the
processor is running, and
process just long enough to
blend. Process ingredients
for spreads and dips the
same way. They should be
at room temperature and
cut into 1-inch (2.5cm)
cubes, or added by table-
spoonfuls
To make mayonnaise:
You can make foolproof
homemade mayonnaise
with your Premier Series 11
Cup Food Processor. The
work bowl and metal blade
must be clean and dry. Use
the metal blade to process
9