Cuisinart FCC-2 User Manual - Page 9
Cleaning And, Maintenance
![]() |
View all Cuisinart FCC-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
MEMORY FEATURE The appliance features an internal "memory" that lets you leave the kettle off the base for up to 2 minutes without it going into standby mode. When returned to the base, it will resume the heating and/or Keep Warm cycles right where they left off. Note: If appliance goes into standby mode before it's returned to base, simply reselect your preset temperature and press to turn it back on. BOIL-DRY PROTECTION 1. This appliance is equipped with boil-dry protection. If it starts heating without enough water in the unit, the heater will automatically shut off to avoid damaging the heating element. Once the kettle has cooled down, lift it off the base, then replace it to reset and restart the heating cycle. 2. The quickest way to cool down the heater is to fill the kettle with cold water; however, you can also wait for it to cool down by itself. CHANGE OF TEMPERATURE SETTING The temperature of this unit can be changed from Fahrenheit to Celsius. Press the Temperature Control ( ) for more than 3 seconds. The temperature is factory preset at Fahrenheit. CLEANING AND MAINTENANCE Always turn this appliance off and remove the plug from the electrical outlet before cleaning. Lift up the filter basket lid. Remove and discard the ground coffee from the coffee filter basket. The filter basket can be washed in warm, soapy water and rinsed thoroughly, or cleaned in the upper rack of the dishwasher. Dry all parts after use. Do not put any water in the unit once the filter basket has been removed. Wipe the area under the filter basket with a damp cloth. Remove the kettle from the base. Discard any remaining coffee. The kettle and lid can be washed in warm, soapy water and rinsed thoroughly, or placed in a dishwasher. The kettle and kettle lid should be placed on the upper rack only. Do not use any scouring agents or harsh cleaners on any part of the coffeemaker. Never immerse power base in water or other liquids. To clean base, simply wipe with a clean, damp cloth and dry before storing. Fingerprints and other blemishes on the housing can be washed off with soap and water or a nonabrasive cleaning solution. Wipe base with a clean, damp cloth. Never use rough, abrasive materials or cleaners to clean the base. Do not dry the inside of the kettle with a cloth, as lint may remain. Maintenance Any other servicing should be performed by an authorized service representative. 9
![](/manual_guide/products/cuisinart-fcc2-user-manual-e5b50f9/9.png)