Cuisinart GR-300WSP1 User Manual - Page 7
a. If the plates are in PREHEAT mode, they will
View all Cuisinart GR-300WSP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
The selected plate(s) and the corresponding temperature(s) will appear on the LCD screen. 2. T urn the temperature dial for the selected plate(s) to the desired setting - from Warm to 450°F. The temperature readout(s) in the LCD screen will change as you turn the dial. NOTE: Warm setting will display as 200°F. In the example below, the lower plate temperature has been set to 350˚F. NOTE: If both plates are selected, when the first plate reaches temperature it will show READY and the unit will beep 1 time; you can begin cooking on this plate if you choose. The second plate will continue to preheat until it reaches temperature, at which time it will show READY and the unit will beep 3 times. In the example below, the upper plate temperature has been set to 250˚F and is ready, and the lower plate temperature has been set to 350˚F and is still preheating. 3. O nce the desired temperature setting(s) have been selected, press the START/STOP button. NOTE: If the START/STOP button is not pressed within 10 minutes, the unit will enter sleep mode. Turn any knob or press any button to reactivate the unit. a. The LED light around the START/STOP button will illuminate and the unit will beep one time. b. In the LCD screen, PREHEAT will appear and the selected temperature(s) will flash as the plate(s) heat up. It may take up to 20 minutes to reach operating temperature, depending on the temperature(s) selected. c. When the plate(s) reach temperature, the selected temperature(s) will stop flashing, READY will display, and the unit will beep 3 times. 4. T o change the temperature(s) at any time during operation, simply turn the temperature dial of the selected plate(s) to the new setting. a. If the plate(s) are in PREHEAT mode, they will continue to preheat to new selection. b. If the plate(s) are in READY mode and the temperature(s) are lowered, READY will remain on display as the unit adjusts to the lower temperature(s). c. If the plate(s) are in READY mode and the temperature(s) is raised, PREHEAT will display and the higher selected temperature will flash as the plate(s) heat up. Once the higher temperature(s) is reached, READY will display, the temperature(s) will stop flashing, and the unit will beep 3 times. 5. T o change the plate selection at any time during operation, simply turn the PLATE SELECT dial to the new selection and adjust the plate(s) temperature (if necessary). PREHEAT will display for new selected plate(s) and the temperature will flash as the plate(s) heat up. Once the new temperature(s) are reached, READY will display, the temperature(s) will stop flashing, and the unit will beep 3 times. 7