CyberPower PDU81006 User Manual - Page 24

Operation Remote Management The remote management function provides monitoring of the PDU operational information, controlling outlets and utilizing SNMP functionality. Web Remote management can be performed via web interface. To access the web interface, please follow the instructions below: 1. Enter the IP address of the PDU into a web browser. 2. Enter the user name and password of the PDU device at the authentication screen. Note: The default username is "cyber" and the default password is "cyber". For additional information about the features and functionality of CyberPower Management Console, please refer to the Intelligent PDU Web Interface User's Manual available for download from www.cyberpower.com. Telnet and SSH The CyberPower PDU provides Telnet and Secure Shell (SSH) as Remote Management methods. Telnet uses user name and password as basic security while SSH has a higher security level with encryption of the transmitted packets including user name, password, and data. Configure the Setting of Telnet and SSH on the Web Interface. The default user name and password is cyber; cyber. SNMP The CyberPower PDU supports SNMPv1 and SNMPv3 protocols. Download the CyberPower MIB file from www.cyberpower.com and add it to an SNMP-supported management software. Default read/ write community is public/private for SNMPv1. SNMPv3 provides a higher security level than SNMPv1 by encrypting the transmitted packet. Configure the settings of the SNMPv1/SNMPv3 on Web Interface. Local Management LCD Operation The LCD screen provides instant information, such as voltage, current and power, for the PDU. In addition, users can use the interface to configure each PDU parameters and control each outlet on the Switched PDU. The LCD detects the installation orientation of the PDU (horizontally or vertically), therefore automatically rotates the screen to best fit the reading direction. A. Scroll Mode: The PDU information will display in following order automatically when "Scroll Mode On" is configured. Device Information Bank 1 Information (2U series) Bank 2 Information (2U series) Environment Status (Displays when the ENVIROSENSOR is connected) Alert B. Main Menu Map Alert Meter Current Log Device Bank Outlet Device Control Bank 1/2 Outlet 1-N Setting About LCD Reset Reboot Model Name Serial Number Network Daisy Chain (Displays when the PDUs are connected) Hardware Version Firmware Version Immediate On Delay On Immediate Off Delay Off Reboot Delay Reboot Color Brightness Direction Screen off Account (User Name and Password) Except TCP To Default 22