CyberPower PDU81006 User Manual - Page 25

Environmental Monitoring optional, Device Reset, Unattended/Automatic Shutdown, LED Indicators

Get CyberPower PDU81006 PDF manuals and user guides View all CyberPower PDU81006 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Operation LED Indicators Indicator Status Tx/Rx Status Green Orange Red Off On (Green) Flashing On LINK Off On Outlet Off Description The PDU status is ok. Warning. Critical. The PDU power is off. The PDU power is on. Receiving/transmitting data packet. Reset finished. Indicates the PDU is connected to the LAN. Indicates the PDU is not connected to the LAN. The outlet is on and providing power. The outlet is off. Environmental Monitoring (optional) CyberPower PDUs along with the environmental sensor (ENVIROSENSOR) provide temperature and humidity monitoring in a server closet and/or datacenter remotely. To connect the PDU with ENVIROSENSOR, use the RJ45 Ethernet Cable included with the ENVIROSENSOR. Plug one end into the Daisy Chain (In)/ ENVIROSENSOR port on the PDU and the other end into the RJ45 port on the ENVIROSENSOR (as shown in figure below). When the PDU correctly connects to the ENVIROSENSOR, users can see the temperature and humidity data via the Web Interface. For further information regarding ENVIROSENSOR configuration, please refer to the Intelligent PDU Web Interface User's Manual. Device Reset • To locally reset all the settings to default, use Reset function in the LCD screen. • To remotely reset all the settings to default, log in to the Web interface, enter the Reset page and apply the function. Unattended/Automatic Shutdown PowerPanel® Business Edition (Client) software automatically initiates a graceful shutdown on the connected computer's operating system. PowerPanel must be installed on every computer or server for which the shutdown is to take place. The computer will receive a message from the PDU, and will perform the shutdown according to the instructions provided, including shut downs at exact times and dates. Step 1. Computer Configuration 1. Install PowerPanel® Business Edition Client on every computer or server that will be part of the shutdown process (Follow the instructions in the PowerPanel® Business Edition User Manual). 2. Configure the settings in PowerPanel® Business Edition Client. See the PowerPanel Business® Edition User Manual for detailed instructions. Step 2. PDU Configuration Verify that the IP address of all computers that will be part of the shutdown process, are included in the Client List on the web interface. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
23
Operation
Environmental Monitoring (optional)
CyberPower PDUs along with the environmental sensor
(ENVIROSENSOR) provide temperature and humidity monitoring
in a server closet and/or datacenter remotely. To connect the
PDU with ENVIROSENSOR, use the RJ45 Ethernet Cable included
with the ENVIROSENSOR. Plug one end into the Daisy Chain (In)/
ENVIROSENSOR port on the PDU and the other end into the RJ45
port on the ENVIROSENSOR (as shown in figure below). When the
PDU correctly connects to the ENVIROSENSOR, users can see the
temperature and humidity data via the Web Interface. For further
information regarding ENVIROSENSOR configuration, please refer
to the Intelligent PDU Web Interface User’s Manual.
Device Reset
•
To locally reset all the settings to default, use Reset function in
the LCD screen.
•
To remotely reset all the settings to default, log in to the Web
interface, enter the Reset page and apply the function.
Unattended/Automatic Shutdown
PowerPanel® Business Edition (Client) software automatically
initiates a graceful shutdown on the connected computer's
operating system. PowerPanel must be installed on every computer
or server for which the shutdown is to take place. The computer will
receive a message from the PDU, and will perform the shutdown
according to the instructions provided, including shut downs at
exact times and dates.
Step 1. Computer Configuration
1. Install PowerPanel® Business Edition Client on every computer
or server that will be part of the shutdown process (Follow the
instructions in the PowerPanel® Business Edition User Manual).
2. Configure the settings in PowerPanel® Business Edition Client.
See the PowerPanel Business® Edition User Manual for detailed
instructions.
Step 2. PDU Configuration
Verify that the IP address of all computers that will be part of the
shutdown process, are included in the Client List on the web interface.
LED Indicators
Indicator
Status
Description
Status
Green
The PDU status is ok.
Orange
Warning.
Red
Critical.
Tx/Rx
Off
The PDU power is off.
On (Green)
The PDU power is on.
Flashing
Receiving/transmitting data packet.
Reset finished.
LINK
On
Indicates the PDU is connected to the
LAN.
Off
Indicates the PDU is not connected to
the LAN.
Outlet
On
The outlet is on and providing power.
Off
The outlet is off.