D-Link DAP-1360 Quick Installation Guide - Page 5
Step 2: Connect the Antenna and Ethernet Cable.
UPC - 790069323003
View all D-Link DAP-1360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
WARNING! The DAP-1360's power output is 5 volts DC, 2.5 Ampere. Use only the power adapter supplied with this DAP-1360 or one with the same power specifications. Using a power adapter with a different voltage or plugging your DAP-1360 to a wrong AC voltage outlet will damage this device and will void the warranty for this product. Ethernet LAN Port Can be connected to Ethernet port of computer, or to an Ethernet switch or LAN port of a router. Power Socket Connect to a 5VDC 2.5A power adapter. Step 2: Connect the Antenna and Ethernet Cable. Connect both antennas to the antenna connectors on the back of the DAP-1360. Connect one end of the Ethernet cable to the LAN port on the back panel of the DAP-1360, and the other end of this cable to your computer's Ethernet port. If your computer is connected to an Ethernet network via an Ethernet switch, connect this end of the cable to the switch's port. 3