D-Link DAP-1513 Product Manual - Page 33

Con WPA/WPA2 Personal - ip address

Get D-Link DAP-1513 PDF manuals and user guides
UPC - 790069352010
View all D-Link DAP-1513 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Section 4 - Security Configure WPA/WPA2 Personal It is recommended to enable encryption on your wireless MediaBridge® before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the MediaBridge®(192.168.0.50). Click on Setup and then click Wireless Setup on the left side. 2. Next to Security Mode, select WPA Personal. 3. Next to WPA Mode, select Auto WPA or WPA2. 4. Next to Cipher Type, select TKIP or AES. 5. Next to Pre-Shared Key, enter a key. The key is entered as a passphrase in ASCII format at both ends of the wireless connection. The passphrase must be between 8-63 characters. 6. Click Save Settings at the top of the window to save your settings. If you are configuring the MediaBridge® with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the MediaBridge®. D-Link DAP-1513 User Manual 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
33
D-Link DAP-1513 User Manual
Section 4 - Security
Configure WPA/WPA2 Personal
It is recommended to enable encryption on your wireless MediaBridge® before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the MediaBridge®(192.168.0.50).
Click on
Setup
and then click
Wireless Setup
on the left side.
2. Next to
Security Mode
, select
WPA Personal
.
3. Next to
WPA Mode
,
select
Auto WPA
or
WPA2
.
4. Next to
Cipher Type
, select
TKIP
or
AES
.
5. Next to
Pre-Shared Key
, enter a key. The key is entered as a
passphrase in ASCII format at both ends of the wireless connection.
The passphrase must be between 8-63 characters.
6. Click
Save Settings
at the top of the window to save your settings.
If you are configuring the MediaBridge® with a wireless adapter, you
will lose connectivity until you enable WPA-PSK on your adapter
and enter the same passphrase as you did on the MediaBridge®.