D-Link DAP-2020 Manual - Page 33
Enable Auto, Channel Scan
View all D-Link DAP-2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Section 3 - Configuration Wireless Client Mode Wireless Mode: Select Wireless Client Mode from the drop-down menu. Site Survey: Wireless Type: Click Site Survey to display a list of wireless networks in your DAP-2020 area. You may select the wireless access point to connect to. Select Infrastructure if connecting to an access point or wireless router, or select Ad-Hoc if connecting to another wireless client. Wireless Network Enter the SSID of the access point you want to repeat the signal Name: of. If you do not know for sure, click Site Survey and select it from the list, if available. 802.11 Mode: Select the appropriate 802.11 mode based on the wireless clients in your network. The drop-down menu options are 802.11n Only, Mixed 802.11n and 802.11g, or Mixed 802.11n, 802.11g and 802.11b. Wireless Channel: The channel will automatically change to the channel of the AP you are connected to. Enable Auto The Auto Channel Scan setting can be selected to allow the Channel Scan: DAP-2020 to choose the channel with the least amount of interference. Channel Width: Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu. Visibility Status: Check the box if you do not want the SSID to be broadcast by the DAP-2020. This prevents the SSID from being seen by site survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-2020 in order to connect to it. Wireless MAC You can clone the wireless MAC address to connect the device. Clone: Wireless Security Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual for a detailed Mode: explanation of the wireless security options. WPS: Select enable if you want to configure the DAP-2020 with Wi-Fi Protection setup. D-Link DAP-2020 User Manual 33