D-Link DAP-2020 Manual 1 - Page 32
Add New, Repeater, Site Survey, 11n Only, Mixed 802.11n and, 11g, or Mixed 802.11n
View all D-Link DAP-2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Section 3 - Configuration Repeater Mode Enable Wireless: Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. You may also set up a specific time range (schedule). Select a schedule from the drop-down menu or click Add New to create a new schedule. DAP-2020 Wireless Mode: Select Repeater from the drop-down menu. Site Survey: Click Site Survey to display a list of wireless networks in your area. You may select the wireless access point to connect to. Wireless Network Enter the SSID of the access point you want to repeat the Name: signal of. If you do not know for sure, click Site Survey and select it from the list, if available. 802.11 Mode: Select the appropriate 802.11 mode based on the wireless clients in your network. The drop-down menu options are 802.11n Only, Mixed 802.11n and 802.11g, or Mixed 802.11n, 802.11g and 802.11b. Enable Auto The Auto Channel Scan setting can be selected to allow Channel Scan: the DAP-2020 to choose the channel with the least amount of interference. Wireless Channel: The channel will automatically change to the channel of the AP you are connected to. Channel Width: Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu. Visibility Status: Check the box if you do not want the SSID to be broadcast by the DAP-2020. This prevents the SSID from being seen by site survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-2020 in order to connect to it. Wireless Security Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual for a detailed Mode: explanation of the wireless security options. D-Link DAP-2020 User Manual 32