D-Link DAP-2310 DAP-2310 User Manual - Page 46
DHCP Server, Dynamic Pool Settings
View all D-Link DAP-2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Section 3 - Configuration DHCP Server Dynamic Pool Settings The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network, the DAP-2310 is capable of acting as a DHCP server. Function Enable/Disable: Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses to devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DAP-2310 to function as a DHCP server. IP Assigned Input the first IP address available for assignment From: on your network. The Range of Enter the number of IP addresses available for Pool (1-254): assignment. IP addresses are increments of the IP address specified in the "IP Assigned From" field. Subnet Mask: All devices in the network must have the same subnet mask to communicate. Enter the submask for the network here. Gateway: Enter the IP address of the gateway on the network. WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer that has a dynamically assigned IP address. D-Link DAP-2310 User Manual 46