D-Link DAP-2330 Quick Install Guide - Page 8

3. Installation Power on the access point To power on the DAP-2330, you can use ONE of the following methods: 1. Connect the supplied power adapter, OR 2. Plug one end of your Ethernet cable into the LAN port of the DAP-2330, and the other end into a port on a PoE switch. Configure the access point To set up and manage the DAP-2330, use one of the following methods: 1. Connect the access point and your computer directly via a straight-through Ethernet cable. Manage the access point from the computer. Ensure your computer is configured with a static IP address in 192.168.0.0/24 subnet. Launch a web browser, type the default IP address of the access point (http://192.168.0.50) and then press Enter. Log in to the Administration Web pages. The default login information is: Username: admin Password: (Leave the password field blank) DAP-2330 Computer 2. Connect the access point and your computer to the same switch. Manage the access point from the computer. Enter 192.168.0.50 in the address field of your browser, which is the default IP address of the access point. Log in to the Administration Web pages. The default login information is: Username: admin Password: (Leave the password field blank) 6 DAP-2330 Install Guide