D-Link DAP-2682 User Manual - Page 8

Basic Installation, Hardware Setup, Con the access point

Get D-Link DAP-2682 PDF manuals and user guides View all D-Link DAP-2682 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Section 2 - Installation Basic Installation Hardware Setup To power on the DAP-2682, you can use ONE of the following methods: 1. Plug one end of your Ethernet cable into the LAN port of the DAP-2682, and the other end into a port on a 802.3at PoE switch. 2. Purchase separately a DPE-301GI PoE injector if you need to connect the Access Point without a 802.3at PoE Switch. Configure the access point DAP-2682 OR 802.3at PoE Switch PoE Injector Power Adapter Computer Computer To set up and manage the DAP-2682, use one of the following methods: 1. Connect the access point and your computer to the same switch. Manage the access point from the computer. Enter 192.168.0.50 in the address field of your browser, which is the default IP address of the access point. Log in to the Administration Web pages. The default login information is: Username: admin Password: (Leave the password field blank) 2. Connect the access point and your computer via DPE-301GI. Manage the access point from the computer. Ensure your computer is configured with a static IP address in 192.168.0.0/24 subnet. Launch a web browser, type the default IP address of the access point (http://192.168.0.50) and then press Enter. Log in to the Administration Web pages. The default login information is: Username: admin Password: (Leave the password field blank) D-Link DAP-2682 User Manual 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
8
D-Link DAP-2682 User Manual
Section 2 - Installation
Basic Installation
Hardware Setup
To power on the DAP-2682, you can use ONE of the following methods:
1. Plug one end of your Ethernet cable into the LAN port of the DAP-2682, and the other end into a port on a 802.3at PoE switch.
2. Purchase separately a DPE-301GI PoE injector if you need to connect the Access Point without a 802.3at PoE Switch.
Configure the access point
To set up and manage the DAP-2682, use one of the following methods:
1. Connect the access point and your computer to the same switch. Manage the access point from the computer.
Enter 192.168.0.50 in the address field of your browser, which is the default IP address of the access point.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password:
(Leave the password field blank)
2. Connect the access point and your computer via DPE-301GI. Manage the access point from the computer.
Ensure your computer is configured with a static IP address in 192.168.0.0/24 subnet.
Launch a web browser, type the default IP address of the access point (http://192.168.0.50) and then press Enter.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password:
(Leave the password field blank)
OR
Computer
802.3at PoE Switch
DAP-2682
Computer
PoE Injector
Power
Adapter