D-Link DAP-3666 Quick Install Guide - Page 3

ENGLISH Before You Begin Hardware Overview This installation guide provides instructions for installing the DAP-3666 on your network. Additional documentation is also available on the D-Link support website. • Nuclias Connect Manual: For additional information and instructions on how to configure the device using Nuclias Connect. • DAP-3666 User Manual: For additional information and instructions on how to configure the device using the web user interface. Package Contents This DAP-3666 package includes the following items: • DAP-3666 Access Point • Mounting Plate and Hardware • Grounding Wire • Quick Start Guide LED Indicators LAN2 LAN1(PoE) 1 Figure 1: Front Panel LED # LED Description Green (Solid) - Device operational 1 Power/ Status Red (Flashing) - Device booting up/Device malfunctioned Red (Solid) - Device boot up has failed Table 1: LED Description Interface Connectors If any of the above items are damaged or missing, please contact your local D-Link reseller. LAN2 LAN1(PoE) Note: To power the unit, use an 802.3af or 802.3at PoE Switch or PoE Injector. System Requirements • Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter • Internet Explorer 11, Safari 7, Firefox 28, or Google Chrome 33 and above (for configuration) 1 23 4 Figure 2: Bottom Connectors # Connector Description 1 Mounting Connector for the mount screw. Lock 2 Reset Press and hold for 10 seconds to factory reset the device. 3 LAN2 Port Gigabit RJ-45 port for data. 4 LAN1(PoE) Port Gigabit RJ-45 port for data and Power over Ethernet (PoE) power. Table 2: Interface Description DAP-3666 Quick Installation Guide 1