D-Link DAP-X2810 Quick Install Guide - Page 3
English - d link
![]() |
View all D-Link DAP-X2810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
ENGLISH Before You Begin System Requirements This installation guide provides instructions for installing the DAP-X2810 on your network. Additional documentation is also available on the D-Link support website. • Nuclias Connect Manual: For additional information and instructions on how to configure the device using Nuclias Connect. • DAP-X2810 User Manual: For additional information and instructions on how to configure the device using the web user interface. • Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter • Internet Explorer 11, Safari 7, Firefox 28, or Google Chrome 33 and above (for configuration) Hardware Overview LED Indicators Package Contents This DAP-X2810 package includes the following items: • DAP-X2810 Access Point • Power Adapter (Optional) • Mounting Plate and Hardware • Quick Start Guide If any of the above items are damaged or missing, please contact your local D-Link reseller. Note: Using a power supply with a different voltage than the one recommended for the device will cause damage and void the warranty for this product. Note: No power adapter is supplied with this product. To power the unit, use an 802.3at PoE Switch or an 802.3at PoE Injector. 1 Figure 1: Front Panel LED # LED Description Green (Solid) - Device operational 1 Power/ Status Red (Flashing) - Device booting up/Device malfunctioned Red (Solid) - Device boot up has failed Table 1: LED Description DAP-X2810 Quick Installation Guide 1
![](/manual_guide/products/dlink-dapx2810-quick-install-guide-6d3a5ba/3.png)