D-Link DAP-X2810 Quick Install Guide - Page 6

ENGLISH 1. Clip the two ceiling brackets onto a ceiling FCC: crossbar. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 23.9 cm between the radiator & your body. Figure 6: Attaching the Mounting Plate 2. Use the included screws to secure the mounting plate to the ceiling brackets. 3. Plug the Ethernet cable into the LAN (PoE) port of the device. Note: If you are powering the device with a power adapter, plug the adapter into the Power Input port. NCC警語: Figure 7: Mounting the Device 4. Rotate the DAP-X2810 into the grooves on the mounting plate to secure it to the plate. 4 DAP-X2810 Quick Installation Guide