D-Link DBA-1210P User Manual - Page 61
Configuring SSID MAC Filtering, Settings Using RADIUS Authentication, 1.7.3 Configuring SSID
View all D-Link DBA-1210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Allow Deny Allow devices that correspond with a MAC address in the MAC ACL to connect to the SSID. Prevent devices that correspond with a MAC address in the MAC ACL to connect to the SSID. 7. Select a MAC ACL from the drop-down menu. Note: To create a MAC ACL, refer to the MAC ACL section on page 73. 8. [Optional] Click Add a MAC ACL to create a new MAC ACL. 9. Click Save. 10. Click Push Configuration. 8.1.7.2 Configuring SSID MAC Filtering Settings Using RADIUS Authentication Users can configure an external 802.1x RADIUS server to authenticate users attempting to access the network. 1. Navigate to the Configure > Access Point > Profiles page. 2. From the Profile list, click SSID under the Actions column of the Profile the SSID you wish to edit. 3. From the SSID list, click the SSID name of the SSID you wish to edit. 4. In the SSID configuration window, click the Access Control. 5. In the MAC Filtering section, click Enable. 6. Select RADIUS as the Filter type 7. [Optional] If you have no preconfigured RADIUS servers, click Add a RADIUS server and specify the following information: Host Port Secret Enter the IP address of the RADIUS server. Enter a port for the RADIUS server. The range is between 1 and 65535. Enter a shared secret. 8. Select a primary RADIUS server database from the drop-down menu. 9. [Optional] Select a secondary RADIUS server database from the drop-down menu. 10. Click Save. 11. Click Push Configuration. 8.1.7.3 Configuring SSID IP Filtering 53