D-Link DBA-1210P User Manual - Page 73
Changing the Device Connection, Type to DHCP, 2.5.4 Changing the Device Connection to, Static
View all D-Link DBA-1210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
1. Navigate to the Configure > Access Point > Devices page. 2. From the device list, click the device name. 3. In the Site and Profile section, select a Site from the drop-down menu. 4. In the Site and Profile section, select a Profile from the drop-down menu. 5. Click Apply. 8.2.5.3 Changing the Device Connection Type to DHCP Depending on configuration of the network, the device may require DHCP configuration in order to connect to the Nuclias Cloud. Note: By default, the connection type is set to Local Setting, which refers to the local connection type configured on the physical device. All unmodified devices are configured to use DHCP. 1. Navigate to the Configure > Access Point > Devices page. 2. From the device list, click the device name. 3. In the IP Connection section, select DHCP as the Type. Note: Changing the connection type may disrupt the connection to the Nuclias Cloud. 4. When prompted to confirm, click Yes. 5. Specify the following information: VLAN VLAN mode VLAN tag [Optional] Check to enable VLAN functionality. This segments traffic on the SSID. Select the VLAN type. Tagged: Adds an 802.1Q header to traffic. Untagged: Does not add a tag to traffic. If the VLAN mode is set to Tagged, specify a VLAN tag. This will segment traffic with the respective VLAN tag. 6. Click Apply. 8.2.5.4 Changing the Device Connection to Static IP Depending on configuration of the network, the device may require a static IP configuration in order to connect to the Nuclias Cloud. 65