D-Link DBS-2000-52 User Manual - Page 77
Configuring Local Port Settings, for One or More Switch Ports
View all D-Link DBS-2000-52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
6. Click the checkbox next to the parameters to display them in the overview. Note: All checked parameters will automatically appear. 8.3.2 Configuring Local Port Settings for One or More Switch Ports Switch port configuration allows administrators to configure extensive port functionality including port availability, port speed, RSTP, VLAN, PoE, and port activity schedules for an individual port or for a group of ports. Note: These local settings will override any conflicting Profile settings associated with the device. 1. Navigate to the Configure > Switch > Switch Ports page. 2. From the port list, check the box next to the ports you wish to edit. 3. Click Edit. 4. Specify the following information: Note: At the top of the edit port window is a list of all selected ports. The changes made will apply to all selected ports. Port name Enter a name for the port. If multiple ports are selected, this name will be applied to all ports. Port state Choose to enable or disable the port. RSTP Choose to enable or disable Rapid Spanning Tree Protocol (RSTP). RSTP prevents data loops caused by issuing frequent BPDU packets to monitor link status. Note: RSTP cannot be used in conjunction with LBD. Note: User must enable Profile/Settings/STP Configuration for this port to enable RSTP STP guard If RSTP is enabled, choose the guard type. 68