D-Link DCS-1000W User Manual - Page 68
I/O Connector
View all D-Link DCS-1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Type ping x.x.x.x, where x.x.x.x is the IP address of the DCS-1000W. The succeeding replies as illustrated below will provide useful explanation to the cause of the problem with DCS-1000W IP address. I/O Connector I/O Connector Definition for DCS-1000W An 8-pole connector is provided for auxiliary IO connections to the DCS1000W. The IO connector provides the physical interface for 2 digital outputs and 2 digital inputs that are used for connecting a diversity of external alarm devices to the DCS-1000W such as IR-Sensor and alarm relay. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed. The supported transistor output can give a maximum of DC 5V to the externally connected alarm devices and once triggered the current will activate the devices. In 11 In 11 & In 12 is a pair for digital input. It works at voltage 5V In 12 In 21 In 21 & In 22 is a pair for digital input. It works at voltage 5V In 22 Out 1 + Out 1 + & Out 1 - is a pair for digital out. The out put voltage is 5 Out 1 - V and maximum current is 100 mA Out 2 + Out 2 + & Out 2 - is a pair for digital out. The out put voltage is 5 Out 2 - V and maximum current is 100 mA 67