D-Link DCS-2132L User Manual - Page 20

Zero Configuration Setup, Step 1, New Device Found, Your setup is complete - d link cloud network camera

Get D-Link DCS-2132L PDF manuals and user guides View all D-Link DCS-2132L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Section 2: Installation Zero Configuration Setup Note: The Zero Configuration Setup will only work with a registered D-Link Cloud Router and an active mydlink account. Step 1: Attach the power supply to the power input on the DCS-2132L and connect it to a wall outlet or power strip. Power is confirmed when the Power LED is lit. Step 2: If you want to use an Ethernet connection, connect the included Ethernet cable to the Ethernet port on the DCS-2132L and connect it to your router. If you want to use a wireless connection, press and hold the WPS button on the camera for five seconds. The blue WPS status LED will start to blink. Then, press the WPS button on your Cloud Router within two minutes. Your Cloud Router will automatically assign your network settings (both wired and wireless) to your camera. Step 3: From any computer, open a web browser, go to http://www.mydlink.com and log into your account. Once mydlink detects your camera, a New Device Found! notice will appear in the bottom-right corner. Click on the camera from the New Devices list and then click Yes to add your camera. WPS Button Your setup is complete! D-Link DCS-2132L User Manual 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
20
D-Link DCS-2132L User Manual
Section 2: Installation
WPS Button
Step 1:
Attach the power supply to the power input on the DCS-2132L and connect it to a
wall outlet or power strip. Power is confirmed when the Power LED is lit.
Step 2:
If you want to use an Ethernet connection, connect the included Ethernet cable to
the Ethernet port on the DCS-2132L and connect it to your router.
If you want to use a wireless connection, press and hold the
WPS
button on the
camera for five seconds. The blue
WPS
status LED will start to blink. Then, press the
WPS
button on your Cloud Router within two minutes.
Your Cloud Router will automatically assign your network settings (both wired and
wireless) to your camera.
Step 3:
From any computer, open a web browser, go to
and
log into your account. Once mydlink detects your camera, a
New Device Found!
notice will appear in the bottom-right corner. Click on the camera from the
New
Devices
list and then click
Yes
to add your camera.
Your setup is complete!
Note:
The Zero Configuration Setup will only work with a registered D-Link Cloud Router and an active mydlink account.
Zero Configuration Setup