D-Link DCS-4603 Quick Install Guide - Page 11
Using the DCS-37-3 Mount optional
View all D-Link DCS-4603 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH Using the DCS-37-3 Mount (optional) Place the DCS-37-3 mounting sticker in the desired location, then use a 6 mm drill bit to drill the required holes 25 mm deep and insert the wall anchors into the holes. If you plan to pass cables through the wall, you will also need to drill a hole for the cable channel. Use the provided screws to mount the DCS-37-3 to the wall using the inner mounting holes. Remove the cover from the camera. Pass the camera connectors through the middle cable channel on the DCS-37-3. Use the provided screws to mount the camera to the DCS-37-3 using the set of mounting holes marked A. Remove the inner cover and adjust the angle and rotation of the camera as desired, then put the inner cover back in place. Attach the camera cover. D-Link DCS-4603 Quick Installation Guide 9