D-Link DCS-5300W Product Manual - Page 61
Configuration > Tools > Applications Continued, Configuration > Tools > Default, Default - dcs install software
UPC - 790069263248
View all D-Link DCS-5300W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Using the DCS-5300W with an Internet browser (continued) Configuration > Tools > Applications (Continued) FTP put snapshots with date and time suffix - Click Apply to make changes effective If the suffix is added, the captured date and time can be easily differentiated from the snapshot file name in either sequential or event operation. For instance, "[email protected]" means the JPEG image was captured at 4 minutes and 5 seconds after 3 o'clock, January 2nd, A.D. 2002. If the suffix is omitted, the file named "video.jpg" on the external FTP server will be refreshed at the specified interval. Configuration > Tools > Default Click on the Default button to access factory setting restoration and camera calibration options from the tools menu. Click Default Click Apply under Restore Factory Default to restore factory default settings. This means any changes made will be lost and the system will be reset to the initial status when shipped from the factory. After confirmation, the system will restart and require the Installation Wizard software program to locate the IP address of the DCS-5300W. Click Apply under Calibrate to restore them camera's factory lens position. This means that the camera will be recalibrated to the default center to position to recover from any external forces that may have affected it. 61