D-Link DCS-6111 Quick Installation Guide - Page 14

Adjusting the Lens Adjusting the Lens Based on the live image retrieved from the camera, adjust the camera lens by performing the following procedures: Adjusting the Viewing Angle Loosen the pan screw and turn the lens module left and right until the desired position is achieved; tighten the pan screw once completed. Loosen the tilt screws on both sides of the camera, and turn the lens module up and down until the desired position is achieved; tighten the tilt screws once completed. Loosen the image adjustment screw and turn the lens to adjust the IP camera's image until the desired orientation is achieved, tighten the image adjustment screw once completed. Loosen Tighten Loosen Tighten Loosen Tighten Adjusting Zoom and Focus Loosen the zoom controller and adjust the zoom factor by moving the controller left and Tighten right until the desired range is Loosen achieved. Tighten the zoom controller once completed. Loosen the focus controller and adjust the focus range by moving the controller left and right until the image is clear. Tighten the focus controller once completed. D-Link DCS-6111 Quick Install Guide 14