D-Link DCS-6111 Quick Installation Guide - Page 15

Attaching the Enclosure Attaching the Enclosure Once the lens is properly adjusted, rearrange the light shield so that it will not obstruct the lens during surveillance. Place the dome enclosure over the IP camera so that the LED sticker on the dome enclosure is properly aligned with the camera's LED. Insert the supplied screws into the two holes located at the base of the dome enclosure, tighten until secure. Place the ring enclosure over the dome enclosure. Once placed, gently turn the ring enclosure clockwise until it locks and is securely attached to the dome enclosure. Note: When attaching the ring enclosure, be sure to first align the line on the ring enclosure with the triangle on the dome enclosure. When attachment is successfully made, the line on the ring enclosure will be aligned with the line on the dome enclosure. 15 D-Link DCS-6111 Quick Install Guide