D-Link DCS-6620 Product Manual - Page 64
DCS-6620 User's Manual, D-Link Systems, Inc., Record Snapshots to your FTP server with Motion - default ip dcs
UPC - 790069277078
View all D-Link DCS-6620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
DCS-6620 User's Manual Record Snapshots to your FTP server with Motion Detection Next, click the Network button under the Advanced tab to set the FTP server settings for the DCS-6620. Click Network 1 123.123.123.1 2 John Smith 3 4 Snapshot 5 6 In this window, enter the settings for the FTP server you wish to record to. Optionally, you can enter settings for a secondary backup FTP server. 1 Local FTP server port: The Default port is 21. To connect to an FTP server, it is recommended that you do not change the port number unless your camera is behind a router. If your camera is behind a router, you can assign any port number to this field, but you must enable port forwarding on the router. Please refer to your router manual for more information on port forwarding. 2 1st FTP server: If you are going to upload snapshots to an FTP server, you will need to fill in the Domain name or IP address of your external FTP server such as ftp://dlink.com or ftp://123.123.123.1. (The server name and IP address will vary depending on the user.) The following user settings must be correctly configured for remote access. D-Link Systems, Inc. 64